AM26LV32ID

PartNumber: AM26LV32ID
Ном. номер: 8616449088
Производитель: Texas Instruments
Фото 1/3 AM26LV32ID
Фото 2/3 AM26LV32IDФото 3/3 AM26LV32ID
Доступно на заказ более 30 шт. Отгрузка со склада в г.Москва 5 дней.
150 руб. × = 300 руб.
Минимальное количество для заказа 2 шт.
от 40 шт. — 68 руб.
от 200 шт. — 54.78 руб.

Описание

The AM26LV32ID is a quadruple low-voltage high-speed differential Line Receiver with 3-state outputs. It is designed to be similar to TIA/EIA-422-B and ITU recommendation V.11 receiver with reduced common-mode voltage range due to reduced supply voltage. The device is optimized for balanced bus transmission at switching rate up to 32MHz. The enable function is common to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit connection directly to a bus-organized system. Each device features receiver high input impedance and input hysteresis for increased noise immunity and input sensitivity of ±200mV over a common-mode input voltage range from -0.3 to 5.5V. When the inputs are open circuited, the outputs are in the high logic state. This device is designed using the Texas Instruments (TI™) proprietary LinIMPACT-C60™ technology, facilitating ultra-low power consumption without sacrificing speed.

• Open-circuit, short-circuit and terminated failsafe
• Pin-to-Pin-compatible with AM26C32, AM26LS32 and MB570
• Accepts 5V logic inputs with 3.3V VCC
• 27mW Typical low power dissipation
• -0.3 to 5.5V Common-mode range
• ±200mV Sensitivity
• 50mV Typical input hysteresis
• 235mW with four receivers at 32MHz
• Green product and no Sb/Br

Микросхемы / Интерфейсы / Драйверы, ресиверы, трансиверы
Корпус: SO16, инфо: QUAD DIFF LINE RCVR 16-SOIC

Технические параметры

размеры
9.9 x 3.91 x 1.58mm
высота
1.58mm
Interface Standards
EIA/TIA-422-B, RS-422, V.11
длина
9.9mm
максимальная рабочая температура
+85 °C
Minimum Operating Temperature
-40 °C
тип монтажа
Surface Mount
Number of Receivers
2, 4
Number of Receivers per Line
10
тип упаковки
SOIC
Pin Count
16
Power Supply Type
Single
Receiver Signal Type
Differential
Typical Single Supply Voltage
3.3 V
ширина
3.91mm

Дополнительная информация

AM26LV32IDG4 AM26LV32ID